I'll buy one or two, or maybe even three.
Ignition timing certainly could be. I believe stock is 8 degrees BTDC, I run mine on regular gas with a bigger cam @ 10-15 degrees BTDC. Adjust...
I personally enjoy the manual choke.
The exhaust leak, depending on where it is, could contribute since it could be messing with o2 sensor readings. Does it stumble when cold, hot, or...
I know this thread is old news, but here we go. I've been doing some jetting on my 32/36. The problem is I put in a [email protected] and .420" lift cam...
Welp, I swiped the ignition system off a buddy's 84 and hotwired the coil. The truck ran perfectly fine. It's obviously the pertronix unit.
Hey fellas. I just completed a rebuild on my 76 20R. It's having some running issues. List of modifications as follows: 210 duration .420 lift...
Another thing, make sure the Weber setup you get is through Redline. There are many copies of the Weber, none I know of are worth anything in...
Good choice. You'll like how it runs.
The 32/36 I bought was 300.00 before taxes and had everything I needed to install it as well. The 32/36 doesn;t have the CFM of the 38 and is a...
Just polishing up a rebuild on my 20R and I need a new snout bolt. I don't have the proper original because the last dork that rebuilt the motor...
Hey people, I'm starting a rebuild on my '76 20R. Looking for some input on a camshaft profile. I plan on using an unported stock intake and...
The 30 would be cool but the VH45DE would be the ultimate. I'd hate to think of what I would do to myself with even a stock VH45 under the hood of...
At some point in the next year I'm considering a first-gen 4runner. Any specific year I should be looking for? So far all I want is an as stock as...
Nice article! While that could certainly be a contributor I've heard from others I know who have old Toyota 2wd's that the upper bushings are a...
Thanks gas crunches, smog and the Cadillac 500... In these modern times I'm finding, no matter how much I LOVE the V8, there really isn't any...
Not yet, but I suppose I could snap a few. Not much to look at I'm afraid... Flat red with a silver SR5 stripe and random small dents, a couple...
Hi guys! My name's Jim and I live in rainy Seattle, Washington. The truck is a beater '76. So far I've replaced the rear axle seals, all new...
I've had my 76 SR5 Pickup since April, and I must say the first thing that impressed me was the fact that all stock it can actually burnout. My...
Take a good look at the upper control arm bushings in the front. Also, the wheel bearings may need to be tightened. Just lift up the front end and...
Separate names with a comma.
