I really thought about it but this time of year I'm more busy than a one legged dude in an ass kicking contest so time to tinker is very scarce....
If the carb is tuned right the idle will stay high enough to idle. On a rig that's strictly used for crawling I'd run a heavier flywheel. If...
For $100 it's pretty fawking sweet. Absolutely a worthy piece. I had a marlin 1600HD in my old wheeler, it used the same pressure plate....
Tach/gauge cluster is in. Not permanently but it'll do for now. I'm going to be pulling the whole factory cluster out and replacing it with a...
It will all take a bit of time to get used to but so far I like it. Once the clutch breaks in a bit more things will smooth out. Right now there...
Clutch and shifter are in. Holyfawking****Iloveit! The clutch pedal is actually a good bit softer than the stock replacement that was in there...
Round one! [IMG] [IMG] Round 2 is due Wednesday, the brake pads and rotors are being drop shipped and I haven't gotten an update on them as of...
First box scheduled to arrive today is from LCE. 9 lb aluminum flywheel, short shifter and a new rubber boot for the base of the shifter. There...
I have a couple kicking around that will work. I'm pulling one out of my truck and going back to the chrome supra stick this. $30 shipped to...
Put the shifter back in the trans and slip a piece of pipe over it and bend it back. Looks like someone left the stick in and let the trans roll...
G40 or w45 something to that effect anyway it doesn't make a link of difference. I don't believe you'll have to cut the floor for the w55 swap...
Show up to an auto x event with prius tires on 15x10's and let me know how it works out for you. :lol: There are lots of ways to build rigs...
I pulled it out of the little bent tab holders under the floor so it was a straighter shot to the trans. I have since found the original 83 supra...
Crownperformance.com will build you anything you may need.
Love what you've done so far. I'm still kicking my own ass for getting rid of this truck. There is wheel and tire fitment info in there if...
I never go by the codes on old vehicles since things usually get mixed around over the years. Easiest way to tell what rear axle you have is to...
You could make it up to her and put a color matching hard tonneau cover on the red truck. :D
I had to turn the the rod adjusters almost all the way in to bring the toe adjustment back in spec so that puts it at nearly an inch narrower over...
The steering arm portion of the spindles is moved closer to the center of the vehicle (for wheel clearance I assume) and that makes for an over...
Less libtards, lower cost of living, hipsters are far and few between. We have a nice long growing season on the east side and while yes it does...
Separate names with a comma.
