Posted same question in other thread, but can anyone tell me the distance they have between their tire and fender with the wheels tucked and no...
Here's a question, anyone tell me what the distance between their tucked tires and the fender is without rubbing. I know there are some people on...
I resurrected an old post on here about fender rolling. Yea I don't want it flared just flattened. Not worried about paint. It's just rattle...
Pics of tools or links would be appreciated too.
Old post reasurection. Need tips on just folding the inside lip up but not affecting the outside of the fender. Watched video on silent but...
yep, that's about what mine looks like. I know people on here have "rolled" the fenders in. I took the plastic inner fender off and it looks...
Yea, I've got a pretty good rub going. Weather is nice today, so going to see what I can do about it. Also going to pull my wheels, and measure...
Welcome to the world of mini truckin. Lots of helpful advice and good information. Look forward to seeing your ride and it's progress.
[IMG] Upclose shot of the shackle assembly. You can see the washers on the upper bolt due to the urethane bushings being wider than the stock...
[IMG] My 85 with DJM LCA, belltech spindle and ball joint flip. 14" rims with 185/70 tires.
I should have the wheels off of it this weekend to measure for my new wheels and fix some front inner fender well rub issues. I'll get out the...
Sounds like a good project there. Tip: If you want a little more drop, do a balljoint flip while you're doing the LCAs. As far as the leaf...
That's awesome, love those trucks. Course I also like the early 60's and the 55/56 too. Maybe someday when I don't have to drive it I'll build...
Yea you can, I try to get on here at least once a day. As far as the wheels go I have no idea. Sure someone on here would, I'm running my stock...
got any pics of that 67 C10 in your siq? I had a 72 with a 383 stroker in it for a couple of years. Gas gas gas. Had to let it go.
As far as the front, 3 inches may be obtained by balljoint flip and some torsion bar tweaking. LCA's are great, but they are fairly involved to...
Leaf spring replacement: Jack up rear of truck and securely support with jackstands. You will need the jack later to support the rear axle....
If your only going 3 inches why not just use blocks? Beefed taco makes some really nice ones. Cheaper and simpler install. website is...
That's what I figured on the torsions. Basic rule is anytime your lowering method reduces the distance between the upper and lower shock mount...
Not sure about the torsion rekey, but you can run stock length shocks with blocks since the mounting points of the shock doesn't change therefore...
Separate names with a comma.
