Do you happen to have the contact info for the guy in Pocatello? I'd like those about maybe picking it up. Thanks.

I still have all the leaf springs it is just a 4 inch angled block. I would suggest a 3 inch block and pull the middle leaf. If you look at my build I had a 1/16 of an inch gap from the bottom of the leaf to the rim. It was extremely close and I am still thinking about getting 3 inch blocks and pull the middle leaf

Bradda...wondring if u pulled your middle leaf out...???...plus a 4" angle block did it hit frame??

I pulled the entire dash out and used a random orbital sander and 60 grit to get rid of the orange peel. I then stepped up to 120, 220, then hand wet sand at 400 and 600. Painted it then hand wet sanded again then painted it one last time. I will be doing a clear coat on it when it warms up so it will look even better when i am done.

what were the steps to sanding your dash?

and those lights are definitely cheap! i actually bought those fake projectors to cut up, they scatter light everywhere and are not a true projector, they are just for looks and a gimmick dont waste your money on those unless your gonna cut em up

if you would really like to know allot more i would recommend signing up over at hidplanet.com i've learned allot from there, its pretty much everything you wanted to know about lighting, LED,HID, halogen

but basically you do need a housing for the projector to protect it, you will use whatever bulb the projector requires, if you get a projector thats meant for retro like mine, it uses a H1, if you salvage some out of crashed headlamps more than likely its gonna be D2S. a wiring harness is not necessary but highly recommended, let me know if you have any more questions and if you sign up on hidplanet..i'm CBRrider over there

So give me a little explanation on what is going on. Do i need separate head lights with projector lenses, what bulbs do i need, do i need separate wiring? I am very savvy with electronics, I have a college education in electronics and Lasers just new to the projector lights. So some technical information would be great.

7X6 BLK DIAMOND PROJECTOR HEADLIGHT H4 BI-XENON HID KIT - eBay (item 360335308496 end time Jan-13-11 20:01:55 PST)

What about something like this? Are these cheap and not even worth it?

and your gonna need some basic tooling and supplies (dremel,aluminum tape, drill, hacksaw/jigsaw etc.)

hope this helps and hope to see you do an HID setup the proper way!

Hey Dion..I can give you a parts list for that retro

1) cheap H4 7x6 headlamps, got mine on ebay for $20
2)Mini H1 projector kit from The Retrofit Source online: headlight upgrades for all applications if you sign up to be a member you get a discount, i got mine for $100 shipped
Bi-xenon: Morimoto Mini (H1) - HID Projectors from The Retrofit Source LLC
3)HID kit of your preference, with H1 bulbs
4)a sheet of .093 lexan from home depot
5)D shape window weatherstripping 3/16-5/16 i think
6)Bixenon wire harness,i would recommend the one from the retrofitsource.com as it plugs right into your projectors
Bi-xenon: H4 - Relay Harnesses from The Retrofit Source LLC