Make sure you clean the surface good before you put the dynomatt. Especially the verticle and roof areas. Also use a roller or something so they getting good contact.

 

thanks for the lookout....

 

Pulled the weak 20R out and dropped in something with a little more bawls.

First run....
YouTube - 22R hybrids first run w/ headwork.

 

Performed brake work over the weekend!
Had rear drums turned...
Replaced shoes, hardware, and wheel cylinders...
Replaced pads and hardware...

Truck actually stops when I put my foot on the brake now and the right rear no longer locks when it decides to work! Woohoo!

 

Got my alarm installed by an idiot! RemOte start worked for one day, the next day it would not shut off. Called the guy he told me that if he had to come out there he would charge me gas money. I told he was an idiot and that he was responsible and warranty his work. Needless to say its not fixed and my truck wont start :-( what a weekend. One of these days pow right in the kisser.

 

sounds like a honda.... lol sounds healthy at least

 

bring it by my house man, I did my own remote start, ill help ya out ! fo free haha

on a side note, pulled my mid leafs, went from 4 to 3 inch blocks, added 2 zero gauge grounds to my alt and it still wont charge.. advance did a alt test on it and it put at 14volts !!?!? wtfff also have 0 gauge going straight to the battery...

 

hopefully wire isnt messed up?

 

nope its not.. all new stinger 0 gauge....

 

^Is it getting 12V power to the field wire on the back of the alt?

If it doesnt get it it wont charge. Could be a regulator causing that...

 

Yeah if you ran completely new wires, id say its the regulator as well.

 

I put a test light on the wires coming from the back and it showed positive on 3 out of 4 the black was ground.

 

also which one is the field wire ? and what do the other wires do, do they have power with the motor on or off with the key on ? my friend is bringing over his multi meter today

 

Where do you live?

 

tampa, about 4 hours away from you.. I googled miramar...

 

Dam it wish you were closer!

 

Sold my truck today. $1000. Hahahahah.

 

wtf why ?!?!

 

wow no body has done anything in 4 days ??? well I finally found out my charge problem, the dummy light fuse was blown, you cant tell by looking at it that its blown at all, just looks a little funny but not blown.. so I replaced it and Ive got power! Also got my brand new oem efi block off plate from the dealer !! thanks everybody for not helping me as I got this one for $7 !! brand new ! lol and look at the cool zipper zip lock back they gave it to me in!..and I found a craftsman 3/8 ratched in my backyard today.. guess my dogs dug it up... its ugly but it was working still untill the switch and release broke.. gunna take it back cuz its a stubby one.. IDK where I even got it but its cool for tight places.

I really wanna work on my truck right now but I have a job to go to in 2 hours.. so its only enough time to get started, which I hate starting stuff and not being able to finish... lol

 

i had one of those, regular size really