I was wondering if I could go lower? here are the pics.

 

Yea u can go lower the bump stop might be hitting might wanna trim it down if u do go lower I would do a ball joint flip and keep some tension on your torsion bars it will ride better and is the truck of the ground in that first photo cause it looks high

 

This is the current stance

 

It's about an inch and a half away from the bump stop I was gonna buy low ones but shave them down to half the size or smaller.

 

Yea then u can go lower just Rember it's a kinda a tuff ride when there real loose you could give it a little drop on torsions and do a spacer ball joint flip would set the front down a nice bit

 

Ok cool. I think I would do that. How many inches would I drop with the ball joint flip with 3 - 1/2inch spacers?

 

I did the ball joint flip with 3 washers and flipped the top without washers and got a 1.25 inch drop
If I drop the back 3" then I will only need a 2" torsion drop.