Wanting to buy msd ignition for my truck. I was looking into a 6al ignition box and a coil. Does anyone know what box is best for our 4cylinders, and what coil to use with what box?

 

iJus got a 6al but still need a coil.
i've seen lots of people run the msd blaster coil

 

Do you have to get different wire from the coil to the distributor or will the stock wire fit ?

 

I have an almost brand new msd blaster coil for sale. 25 bucks, has less then 100 miles on it !

 

Can you ship to hawaii?

 

Is any one running a 2-step in their truck?

 

Also what do you guys think about a MSD 6al & blaster vs LCE crane pro ignition kit?

 

I was running the msd offroad box with a blaster 3 coil and wires. Felt wayyy better than stock, until the msd box crapped out about 1 year later...

 

I was running an msd6al with a blaster ss coil till the 6al took a shiat and I replaced it with a module out of a GM hei distributor. The truck has never ran better.

 

When I talked with LC's tech man about MSD ignitions ,I was told they saw problems with it on the dyno only on the 22re engines. He only recommended the Crane unit & coil pack, as they had no problems show up with it!
I been running it for 4 years with no problems!

 

yeah at your cost lol. yup just checked and I can ship it to you for a little less then 10 bucks.

 

Does the ignition box eliminate the stock ignitor?

 

I'm pretty sure it did !.Can't see in in less I remove the trim cover,& can't find the spec sheet!
Call LC & talk to John!

 

I attempted to run a MSD Blaster coil and wires with stock ignitor. It FRIED the ignitor in about a week. Lucky for me I had a parts truck cause it was like $400 new. So I ended up running stock ignitor with plug cut off, Stock coil to MSD wires

 

Not to start any comparison between MSD or Crane .but I have ran a 6a-l box blaster coil msd wires for about four years no problems from any of them I use the soft touch rev limit. Like crack on short auto x courses . As with any electric device life is limited I expect mine to fail after this post ha

 

ive got a msd blaster 2 coil, msd wires and a old sport compact ignition. works great!

 

My set up is a 6al msd with Bosch coil had two step

 

I'm running an MSD 6A since 1994 and never had any problems. I still have my factory coil & ignitor.

Rick

 

The Crane system can run with or without your stock ignitor / coil. Like TRUCK ACTION, I run the Crane system with LX2 Coil and eliminated the stock ignitor / coil. I have had it installed for about 6 years and no problems.

 

Does the crane system have adjustible rev limiter like the MSD does?