16x8 Rota Grids on a small 195/45/16 stretch. a short video of the lowest STATIC hardbody's on the islands. Good N Evil // 808 Intricate // Jay.Aye Photography on Vimeo
What's the offset of the rotas? Looks pirtty sick!!!! I been looking At the workwheels. I know witch ones I won't but do not know what Offset works?
What size spacer will i need for some Acura TL 17"s? Also what size tire should i run for a decent ride? Any help would be appreciated. thanks.
im new to toyota minis, but here are the ones i've had on my 92 Pickup. '96 Mustang GT 16x7.5, 225/55/R16 And these are the ones i currently have '00 Ford Ranger 15x7, 215/65/R15 (back wheels have a 1/4" Spacers) painted black by previous owner.
17x8 Enkei's off of a Mitsubishi Evo 8 or 9...offset I believe is +38 and im running 1 inch spacers. Tires are 235/45/17's all the way around, I plan to paint the face or the whole wheel semi-gloss or satin black.
I would just go with the 4X4 fenders. You don't want it to look too off road-ish. The 4X4s will tuck most of that in an still look good and be legal.
I'm at 3/4 and I drive too carefully that I feel like I sometimes I can't enjoy the drive. I am thinking of going down to 16-18" I just sold the 20" I had on my truck. Any more that 3/4 and you sou have to cut the wheel wells like I WAS going to do.
Dude, that SHlT LOOKS FAHKEN SICK! I just decided what size rims I want. Do they rub anywhere and did have to roll the fenders?
Chalo those wheels look amazing! i dont say that very much but can you let me know whats the offset? I can tell you trimmed or folded the inner fenders all the way around but seriously that truck is looking sic!
Thanks guys... i think the offsets are +25mm on front and +20mm on the back.. and yea my buddy did the fender rolling, but still rolling the rear fenders wasn't enough so i still had to do some hammering