ok i've decided that being low isnt for me, so im going to sell my lowering parts. The parts have maybe 1500 miles max on them. They are still on the truck, but I will probably take them odff tomorrow. The parts are belltech spindles, nitro 2 shocks, & 3" blocks. Shocks and spindles were 325$ new, so figure $275 for it all. 909-215-8369.

 

Parts for sale

how much for the spindles?

 

Id like to sell it all together. I have no need for the shocks and blocks seperate.

 

Well If he just wants the spindles Ill take the shocks and blocks for a fair price.

 

The only reason I kinda didn't want the shocks was because I just replaced them yesterday... But if yankeetaco72 wants the shocks and blocks there ya go... If you live in corona I'll drive to you, go pick the spindles for $120 cash money

 

I have no problem spliting it up. say $60 for shocks and blocks and $200 for the spindles.

 

$200 for a used spindle is alot, especially since i'm going there to pick them up

 

Are the shocks for the front and back?

 

Well you may think so, but 120 is insultingly low. On ebay there arent any lower than 280. I put them on the truck and drove for about 1000 mile and blew the head gasket. Then It sat for 4 months and since I have driven another 500 miles. So they are basically new.

@ dgerfan they are for the front. I have not replaced the rear shocks since it was lifted.

 

Yea but thats $270 shipped to my door brand new in the box and with all new hardware. Which I still have to go and buy myself. And your spindles aren't new they are gonna have grease all on them...

1984-1995 Toyota Pickup Spindle - Belltech 2000 - Front

 

Well I was just trying to help somone from the site. If you dont like my price you dont have to buy them. But there is no way im going to sell them for anywhere close to 120, I will hold on to them before that. And fyi the spindles ate grease free and I can throw in the 6 cotter pins (new) that came with them.

 

I'm just saying usually when you sell something used its and half of what it would be brand new... But never mind cause for $200 I'd just as well buy them brand new... But good luck selling your kit...

 

The price is has is fair. Let's face it they are spindels. Anyone selling them is almost always going to clean them up and make them greese free. Plus even if they are used it takes a lot to tear them up. For the hardware the only thing the only thing its comes with is cotter pins. You reuse your old parts. Quit giving the guy a hard time. If you can find it cheaper then do so but don't low ball em.

 

Bump

Spindles 180 Firm
Shocks 50 Firm
blocks 15

 

Are the spindles still on the truck?

 

All the parts are off the truck, the spindle are back in their orig box

 

how much did this drop you?

 

Well I'm down to take those spindles off your hands, were in corona are you? Or do you want me to text your cell again?

 

Im more like in norco area off the 15 between the 60 and the 91. Give me a text and I will get back to you in about 20min or so.

 

sale pending on spindles