Still available?
You can have an alarm installed without power locks - I had one (can't remembe which alarm) that I could'e hooked up actuators to but never did.
Everyone makes a big deal about this but I've never had a problem? I just heat up the metal sleeve on the outside(not torching the rubber) until...
If a repair book showed every posibble way to do something you'd have a book nearly as big as the one on how to understand women.
Everything is possible with enough time, money, and resources. :waytogo:
I'm not going to sit here and be a keyboard warrior. Like I said, I know my idea will work 90% of the time and I've done it this way many of times...
Last I checked the torque would only go through the crank? Correct me if I'm wrong, but the starter turns the flywheel which is bolted directly to...
For the bolt, get a breaker bar long enough to be against the frame then bump the key a couple times and let the starter break it loose. Works...
Try cleaning the throttle body, the butterfly gets carbon buildup on the backside and sometimes won't let it close like it should. And while you...
Killer build as always! :waytogo: Only thing I can see that I would change is the mirrors and windshield trim are the only chrome. But that's...
Google "KBS Fabrication" and they are the first ones to pop up..
You just need the distributor and plug wires. I bought the right tach/power plug from napa for like $5.. then just wire it in. And to clarify...
To really reap the benefit of that dizzy you'll need more than just a weber, cam and header. Mine was a laser block 22r, bored .040" over,...
Speaking from experience, they are worth every penny, but only if you have an engine worth it. If you aren't at least mildly built I would just...
It's called a powervalve.. it gives a quick shot of fuel when you stomp on the throttle. I'd also suggest looking at your air/fuel mixture, and...
Separate names with a comma.