Looking for pics of trucks static dropped on 20' wheels. Not 18's, 17's or 16's but 20's only.

Trying to figure out the drop I need and pics would give good reference. I'm thinking a 2/3 drop but unsure.

Thanks.

 

Sorry but a 2/3 drop just won't be low enough with those big 20's lol. 3/4 sounds better with rolled fenders. Cuz those wheels will lift ya a little, so more drop will be in order, just my friendly .02

 

Thanks for your .02.. I'm definitely not rolling any fenders.. Don't really care about maximum drop either. Just wanting to reduce tire to fender gap for daily commute.

Really just looking for pics for refrence.

 

Are you running stock suspension as in no drop?

 

More than likely I'm going to run beltec leafs and lca's. I'm thinking that will put me at the height I'm going for.

 

I have 18 ' s on a 45 series tire and they rub a little just with the full ball joint flip. No 4x4 fenders either.

 

I have a 3/4 on 20x9s. PM me your phone number, Ill get pics to you tommorrow.

 

I've had 20x8.5 and then I bought a 3/4 kit from DJM. Here is the before and after...

Before...






After...

 

Thanks for the pics. Exactly what I was looking for. Visual Refrence..

What did the DJM lowering kit consist off?

 

I bought their 3/4 kit. It included their 2" LCAs and 4" blocks. I ended up bagging my truck but if I were to do it again I would get the 2" LCAs, 2" drop spindles, done a BJ flip, notched the first two cross members forward of the rear axle, get 3" rear drop leafs, 3" blocks and new shocks all around.