Dedicated to Toyota Stout, Hilux, and Pickup Owners

yota4life · 07-06-2009, 12:42 PM

well i guess ill start a project thread since i got my shipment in today haha so i should have this thing bagged in the next few weeks. so ill give some basic info on the truck. its a 91 ex cab 4cyl. so far all ive done is lower it a lil bit put two 4in speakers in stock spot in dash two 6.5in in the doors and 2 12s with a 1200 watt amp. and i also put in a license plate box in the gate here are some pics.

yota4life · 07-06-2009, 12:46 PM

then this morning the fed ex guy came so you guys know what that means.. more parts hell ya. so i got a super lift 4-link, re-6 and re-7, airlift valves, 2 viair 380s, and a 7 gallon tank.. heres some pics

Predracer · 07-06-2009, 12:59 PM

Get to work man! Haha keep us updated looks like a sweet project.

paintinSTR8 · 07-06-2009, 01:06 PM

bad ass man you need a hand let me know, im painting a harley rite now in my garage, after that time for the body drop and 4link. come down and take a look sometime

yota4life · 07-06-2009, 01:15 PM

hell ya thnx guys.. and im just lookin for a welder i can use for a little while

paintinSTR8 · 07-06-2009, 01:39 PM

i got a ok welder, its a 110 but i dont have the gas bottle. use'n a flux core in it. but i have used it on frames and links before worked good every time

yota4life · 07-06-2009, 02:29 PM

hopefully one of my buddys will let me use it for the weekend haha so i can get this thing laid out

yota4life · 08-04-2009, 02:38 AM

went and picked up some metal today for my notch and other misc. things...

bustedknuckles · 08-04-2009, 03:18 AM

awesome man. good luck and keep us informed. Take lots of pictures along the way.

yota4life · 08-04-2009, 03:24 AM

thnx man.. and im getting started soon. my gfs mom is turning the power back on to there shop. its not huge but i can fit my truck in it and have alot of room to work.

07-06-2009, 12:42 PM	#1
yota4life Toyotaholic Join Date: Jun 2009 Location: lodi ca Truck: 1991 xcab 2wd 4cyl Posts: 1,114	project back to a yota well i guess ill start a project thread since i got my shipment in today haha so i should have this thing bagged in the next few weeks. so ill give some basic info on the truck. its a 91 ex cab 4cyl. so far all ive done is lower it a lil bit put two 4in speakers in stock spot in dash two 6.5in in the doors and 2 12s with a 1200 watt amp. and i also put in a license plate box in the gate here are some pics.

07-06-2009, 12:59 PM	#3
Predracer Toyotaholic Join Date: Jul 2008 Location: Conyers, GA Truck: 1980 SR5 looong bed 1978 looong bed #2 Posts: 1,153	Get to work man! Haha keep us updated looks like a sweet project. __________________ The name's Ashton

08-04-2009, 03:18 AM	#9
bustedknuckles Enthusiast Join Date: Feb 2009 Location: Las Cruces, NM Truck: 1985 Toyota, 2000 S10 Xtreme Posts: 250	awesome man. good luck and keep us informed. Take lots of pictures along the way. __________________ Good work is never cheap, and cheap work is never good!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Toyota Pickup Forum Advertisement	:: Register for an account to remove these ads ::

07-06-2009, 12:46 PM	#2
yota4life Toyotaholic Join Date: Jun 2009 Location: lodi ca Truck: 1991 xcab 2wd 4cyl Posts: 1,114	then this morning the fed ex guy came so you guys know what that means.. more parts hell ya. so i got a super lift 4-link, re-6 and re-7, airlift valves, 2 viair 380s, and a 7 gallon tank.. heres some pics

07-06-2009, 01:06 PM	#4
paintinSTR8 Member Join Date: Jun 2009 Location: Stockton Ca. Truck: 93 Yota 2wd reg cab Posts: 64	bad ass man you need a hand let me know, im painting a harley rite now in my garage, after that time for the body drop and 4link. come down and take a look sometime

07-06-2009, 01:15 PM	#5
yota4life Toyotaholic Join Date: Jun 2009 Location: lodi ca Truck: 1991 xcab 2wd 4cyl Posts: 1,114	hell ya thnx guys.. and im just lookin for a welder i can use for a little while

07-06-2009, 01:39 PM	#6
paintinSTR8 Member Join Date: Jun 2009 Location: Stockton Ca. Truck: 93 Yota 2wd reg cab Posts: 64	i got a ok welder, its a 110 but i dont have the gas bottle. use'n a flux core in it. but i have used it on frames and links before worked good every time

07-06-2009, 02:29 PM	#7
yota4life Toyotaholic Join Date: Jun 2009 Location: lodi ca Truck: 1991 xcab 2wd 4cyl Posts: 1,114	hopefully one of my buddys will let me use it for the weekend haha so i can get this thing laid out

08-04-2009, 02:38 AM	#8
yota4life Toyotaholic Join Date: Jun 2009 Location: lodi ca Truck: 1991 xcab 2wd 4cyl Posts: 1,114	went and picked up some metal today for my notch and other misc. things...

08-04-2009, 03:24 AM	#10
yota4life Toyotaholic Join Date: Jun 2009 Location: lodi ca Truck: 1991 xcab 2wd 4cyl Posts: 1,114	thnx man.. and im getting started soon. my gfs mom is turning the power back on to there shop. its not huge but i can fit my truck in it and have alot of room to work.