Just installed an Innovate LC-1 wideband sensor....did some tuning yesterday and the car runs even stronger now. :) It was rich (for safety), AFRs...
Thanks for the props! The car is in a "finished" state right now, so it's time to test the waters....if it doesn't sell, I might have to do some...
Yes, I want to sell it.....it's been my baby for 10 years, but I want something new....here's a link to the ad-...
My first was an '80 Tercel. It was 1989, there are no pics. I had it a few months before my young wifey t-boned a Camaro. Since then I've owned...
I've been running 10-12psi on a stock (Felpro) gasket for 6 years. An MLS is good insurance, granted, but it is not essential. BTW, I have an...
I haven't priced one here yet.. you're probably right, it might not be worth it. You'd have to crate it and mark it fragile, I guess. Good luck...
My 2 cents worth... Bottom end- do a good basic rebuild, don't cut corners. Get the clearances tight, size the rods, grind the crank, bore,...
Sure you can't ship? I'd like to ditch my f'ed up slider....
Hey, I just stumbled onto this writeup- fuel pump comparisons There's good info about injector sizes, flow vs psi, and some different options...
No offense, but this a pretty ambitious project for someone who doesn't know what an in-tank pump looks like.... You have some research to do....
Remove it. When you pull the tank, the pump will be mounted on the pickup bracket. Take the whole thing out, measure it up, have the tubing...
Awesome! A couple of nicks there, but it mostly just knocked the carbon loose. On a LASRE engine, it might have been worse....
The older head flows better and can potentially make more power than the new style. The EFI manifold will not bolt on without seriously modding...
Nice, I like the Engnbldr head. I just put an RE together with Engnbldr parts, if you get their gasket set I think you'll like the head gasket....
It's gonna be a while... I want to put the truck in the garage, strip the box, engine and trannny, front end sheetmetal, and doors off, then paint...
I'll watch it, thanks for the heads-up.... I didn't even expect to find a pan gasket in the set, but it looked like it would help to seal the...
:eyecrazy: Fram alert!!! Haha, it's a Baldwin filter, we use them at work. :)
Okay, most of the rest of the engine is buttoned up now. Most of the parts are new, so it went together pretty nice. The valve cover is just loose...
Wow, you can say that again....the pic in the ad sure didn't show that. I'm over it now for sure, in fact it seems overpriced now, in light of the...
Yeah, me too, but if you don't get it, it's just lime green....and I don't want to explain it all the time. I'm doing something else, it'll look...
Separate names with a comma.
