I have been stockpiling this stuff thinking one day I will get another yota... well, I'm onto another project and need cash so here it goes: All the big heavy stuff is pickup or meet up only... I'm within 2 hours of DC, Baltimore and the surrounding. 1. 4runner front end including grill, bumper, corner lights fenders/linings, power antenna and all other head and fog lights: $250 2. power windows and locks with door switches. I have 3 power window motors and 2 lock poppers assemblies: $200 3. everything to lower these trucks and still have a quality ride. drop spindles (new but have surface rust), sway-a-way torsions and streetacos steel 3" angles/offset blocks with bolts (meant for middle leaf removal): $400 4. cruise control module out of a 4runner v6 but will work with 22re if mounted on the passengers side: $50 5. power steering assembly including everything need to add power steering. pump, pulley, belt, hose etc... $200 Feel free to pm or call/text 717-36O-4991
Chambersburg, PA Sure, I'd sell just the torsions. $175 They were installed/used for 2 weeks and are like new.
@gilpet79 $250 @Houa Thao I'm going to try and keep the front end together. If there's no interest I'll part it and let you know.
That's not a bad price on the powersteering system but it should be noted that it is a 4x steering box. Everything else is compatible with a 2x truck but that box.
I was told it would bolt right up all I needed was to use the pitman arm off my 2wd... That was my plan before I sold my yota.
Kinda sorta... The 2x pitman arm will fit if you either file the master spline to have full splines or grind a few splines on the sector shaft to clear the master. One of the bolt holes lines up fine but the other 2 do not. The 2x box only has 2 bolts through the frame, the other goes into the top.
HEy i have family that is driving from New York down here to California in about 2 weeks, If they swing by to pickup the 4runner front end would you meet up with them on there way through?