Bama's project "Finish"

Discussion in '1989-1995 Build-Up/Project Threads' started by Bama, Oct 22, 2009.

  1. Bama

    Bama Member

    Joined:
    Oct 3, 2009
    Messages:
    38
    Likes Received:
    0
    Location:
    Corbin, KY
    Truck:
    87 std cab
    Well here it is, finally got around to taking pictures. Owned the truck now for about a month or so and just getting started on it. So here is the beginning.

    1990 Std. cab, 22r 4spd, no p/s, p/dl, p/w, or a/c.
    Lowered 4" in front with "re-splined" torsion bars, lowered 5" in rear with 3"blocks and 2"leafs, and rolling on 17" Ford Escape rims.
    Front end has been swapped with a 94 4runner grille and headlights but the guy who installed them didn't do it correctly and only used zip-ties to hold it in place. The paint is rattle can pistachio but that won't be there for long hopefully.
    Bucket seats from I have no idea, and a crappy built center console sub box. When I got it, the interior was white and pistachio green. Now its re-dyed black with just a touch of primer.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    So lets address the body issues I need to fix before any major mods are done:

    Tailgate:
    [​IMG]

    Right rear bed:
    [​IMG]
    [​IMG]

    Right bed side:
    [​IMG]
    [​IMG]

    Passenger side cab corner:
    [​IMG]
    [​IMG]

    Front end:
    [​IMG]
    [​IMG]

    Driver side lower door:
    [​IMG]

    Left bed side:
    [​IMG]
    [​IMG]

    Between cab and bed:
    [​IMG]

    Needed to fix asap:
    Exhaust. Someone cut off and installed CherryBomb muffler under cab
    Adjust valves
    Swap to sail mount mirrors
    Replace engine and trans mounts


    So far the custom plans are:
    22re conversion or 1jz swap if affordable.
    Bagged
    Cando reverse 4-link
    8" Rounded c-notch
    Body dropped to rockers
    Roll pan skin
    Taillights filled and different lights molded in
    One piece rear window
    '00 Taco front end
    20" rims
    4runner center console
    4runner/celica seats
    Aftermarket steering wheel
    Fully functional bed floor so I can carry my quad!
     
  2. nvrenufedge

    nvrenufedge Grand Toyotaholic

    Joined:
    May 21, 2008
    Messages:
    6,720
    Likes Received:
    19
    Location:
    Caldwell, ID
    Truck:
    bagged '93 std cab
    They painted over all the trim & seals. Looks like you got a long road ahead of you. Can't wait to see how it turns out.
     
  3. rajzswap

    rajzswap Addict

    Joined:
    Sep 3, 2009
    Messages:
    743
    Likes Received:
    2
    Location:
    CA
    Truck:
    89 2jz pickup
    Its a Yoshi! :lol: Its in need of some body work for sure. for the bed and tailgate I would just replace it with another one.
     
  4. 93Yoter

    93Yoter Addict

    Joined:
    Dec 8, 2006
    Messages:
    709
    Likes Received:
    1
    Location:
    Central Point, OR
    Truck:
    93 std. cab deluxe
    wonder whats under the paint..........
     
  5. nvrenufedge

    nvrenufedge Grand Toyotaholic

    Joined:
    May 21, 2008
    Messages:
    6,720
    Likes Received:
    19
    Location:
    Caldwell, ID
    Truck:
    bagged '93 std cab
    Looks like there's red on the inner tailgate...
     
  6. krazedprof

    krazedprof Addict

    Joined:
    Feb 14, 2009
    Messages:
    852
    Likes Received:
    1
    Location:
    iowa
    Truck:
    1991 reg cab & 1994 4runner
    good looking project and those seat appear to be from a camaro
     
  7. Bagged_Soon

    Bagged_Soon Enthusiast

    Joined:
    Aug 7, 2009
    Messages:
    163
    Likes Received:
    4
    Location:
    Denver
    Truck:
    9treeze
    holy begezus, hopefully you didn't pay to much for it. you have a fair amount of work ahead of you. LETS SEE SOME PICKS FROM UNDER THE HOOD...........:confused:
     
  8. Bama

    Bama Member

    Joined:
    Oct 3, 2009
    Messages:
    38
    Likes Received:
    0
    Location:
    Corbin, KY
    Truck:
    87 std cab
    Well, under the green is flat black, under that is flat white, under that is OEM red. HAHAHA. I didn't pay anything for it. Took my 92 camry with 245k on it, traded straight across and then took my coilovers, wheels, brakes, and various other performance parts from the camry and sold it, came out on top $1000 so i could pay some bills.

    Plenty of work ahead, but nothing I can't handle.
     
  9. 89dlx47

    89dlx47 Veteran

    Joined:
    May 13, 2009
    Messages:
    312
    Likes Received:
    0
    Location:
    st. louis
    Truck:
    89 standard 2wd
    wats wrong with the cherry bomb? lol i got one on myy truck
     

Share This Page